In Today's World, It's very easy to become a graphic designer. You can easily find resources and tutorials online to learn everything very easily. Also, with the help of advanced designing tools, you can easily create wonderful designs like web designs, Posters or Flyers design, Logo Designs, or print media. But many noobs forget few things and usually make a few mistakes while designing. So, In this article, I have compiled 5 such things that graphic designers should avoid at all costs. So, Let's get started.

Things Designers should avoid

Things that Graphic Designers should avoid at all costs

1. Using web graphics on printed material


With many young designers coming from a pre-dominantly web design background the transfer over from web design to the traditional design for print can bring with it a multitude of design sins. Images supplied at 72dpi and crunched down to load fast on a website are going to reproduce very badly in print you can get away with small thumbnails but blowing things up to any appreciable size is going to be pushing your luck. There are a number of online sites offering free or very cheap quality high-resolution images which are a good source for suitable imagery.

2. Forgetting about or not allowing enough bleed.


A very common error is to send to print a document or flattened image that has no bleed at all. Generally speaking, you should allow at least 3mm around every cut off the edge. Failing to do so will give the printers no leeway and will either crop off the side of the page or give you a white border. It is always a good idea when supplying image files to save layered PSD files then if things need extending or cropping you can do this on the background layer and hopefully cut down your work

3. Using obscure fonts and not embedding or outlining them for output.


We've all been guilty of this at some point and things are generally fine if you are going to be the only person accessing your artwork or documents. However, if someone else needs to amend the files or use your vector logo on one of there publications. Unless you package up the used fonts, they are not going to be able to open the files correctly and some software programs may replace any unknown fonts with a default. This is a particular problem when you need to dig out stuff that was created several years previously and you no longer have your old fonts installed.

4. Supplying print ready artwork using spot colors or RGB


There are valid reasons for using spot colors in artwork, logos that need to reference particular Pantone colors for example. In general design work, however, the most print is sent through on 4 color presses CMYK with occasional 5th color for luminous or metallic color or for spot UV varnish. It is very common for lazy designers to just place RGB images into files and expect the vibrant colors seen on screen to reproduce in print.

5. Allowing design illiterate clients to lead you around the houses


The customer is always right, goes the old adage. However, it is often said with gritted teeth and a sense of patience that recognizes that these morons will at some stage be handing over a fat cheque for your troubles. It is often a good idea when first submitting visuals to throw in a couple of stinkers to hopefully get them to appreciate the design you would like them to accept. There is the very real danger of course of them loving the piece of absolute arsewipe that you knocked up in five minutes to make them think you've been earning your money. Still, it's a living.

1 Comments

  1. Nice post. I used to be checking continuously this blog and I'm impressed! Very helpful info particularly the remaining phase :) I handle such information much. I was looking for this certain info for a very lengthy time. Thank you and best of luck.

    ReplyDelete

Post a Comment

Previous Post Next Post